Release Notes/Solved items Version 2023.2.3
RadiMation version 2023.2.3
- #12894: OPC Driver does not work
- #13901: ESIB 7 error
- #13913: Extend Bonn amplifier driver to reset water cooling interlock error at retry
- #13925: The start position should be allowed to be higher than the end position of the X-orientation of the probe positioner
- #13926: The start position should be allowed to be higher than the end position of the Y-orientation of the probe positioner
- #13938: Change the x-position and the y-position generator to behave as an uni-directional generator by default
- #13951: Extend manual or add application note regarding usage of axis specific correction factors of field probes
- #13955: Add 4 steps as a default possible options for the XY positioner step count
- #13957: ESR TD driver has a resolution configuration which is not expected
- #13965: UFA Calculation not possible due to unspecified tolerance in calibration files - Field closed loop method
- #13966: Maturo NCD turntable time expired before operation completed
- #13978: Multiband: UFA calibration seems to regulate to an average field greater than the specified tolerance
- #13996: index outside the bounds
- #14011: Maturo NCD Turntable: Timeout expired before operation completed.
- #14012: EMPower 7002-009 010 option 010 not detected
- #14016: Extend the Maturo NCD Antenna tower to send the height with fractions.
- #14023: R&S ESRP3 Analyser has a default port of 7895 this should be 5025
- #14026: Amplifier Research FL 7006: Not all bytes are written to the GPIB-Board within the timeout period (GPIB: EABO)
- #14029: EN61000-4-3:2020 Constant Power method is interpreted as being constant field method in the UFA configuration dialog
- #14033: Driver: Raditeq GTEM RGT0250A, RGT0500A, RGT1100A
- #14049: Configurable Power meter clear input buffers before getpower.
- #14052: RSA5065(GPSA mode) is not switching to EMI mode for the final detector measurement
- #14067: Support RF mixer in front of Keysight N9020B MXA
- #14145: RadiMation cannot connect to the R&S NRP powermeters anymore
